国家会议中心二期屋面索承网壳钢结构精细化施工技术

国家会议中心二期主体建筑屋面采用网壳结构,为满足外露钢结构对外观的精细化要求,通过制定《屋面网壳钢结构精细化施工质量验收标准》,在钢结构原料、焊接、焊缝打磨、涂装、成品保护等方面采取措施,保证了钢结构的表观质量.     

A high-throughput chaotic advection microreactor for preparation of uniform and aggregated barium sulfate nanoparticles

A high-throughput (105.5 g/h) passive four-stage asymmetric oscillating feedback microreactor using chaotic mixing mechanism was developed to prepare aggregated Barium sulfate (BaSO₄) particles of high primary nanoparticle size uniformity. Three-dimensional unsteady simulations showed that chaotic mixing could be induced by three unique secondary flows (i.e., vortex, recirculation, and oscillation), and the fluid oscillation mechanism was examined in detail. Simulations and Villermaux–Dushman experiments indicate that almost complete mixing down to molecular level can be achieved and the prepared BaSO₄ nanoparticles were with narrow primary particle size distribution (PSD) having geometric standard deviation, σ_g, less than 1.43 when the total volumetric flow rate Q_total was larger than 10 ml/min. By selecting Q_total and reactant concentrations, average primary particle size can be controlled from 23 to 109 nm as determined by microscopy. An average size of 26 nm with narrow primary PSD (σ_g = 1.22) could be achieved at Q_total of 160 ml/min.     

基于美学基础上的丑陋建筑研究

本文首先从感觉学（即美学）层面探讨了“丑陋”的研究历史，阐释“丑陋”的内涵变化历程。其后，本文总 结出感觉学上的“丑陋”的多重意义。从三个方面来讨论丑陋建筑的判断的标准，并对建筑畅言网的丑陋建筑标 准进行了分析。最后指出丑陋建筑应发挥批判功能，促进建筑学发展与普及。     

钛微合金中锰钢强韧化机制研究

低碳中锰钢因为其优异的力学性能及低成本的成分设计逐渐被应用到海洋平台用厚板生产制备中，通过对钛微合金化低碳中锰钢进行控轧控冷工业试验，观察不同厚度位置的显微组织及析出物形貌，测定了室温拉伸及低温冲击韧性，并对其强韧化机制进行了分析。结果表明，试验钢基体为板条宽度200～400nm的回火马氏体和宽度为50～100nm的逆? 浒率咸甯春喜阕醋橹胰穸确较蜃橹阅芫刃越虾茫慷染笥?60MPa、屈强比均小于等于0. 88、伸长率均大于20%、-60℃冲击功均大于200J。试验钢的主要强韧化机制有亚微米尺度的复合层状组织、大角度晶界韧化机制、亚稳态逆? 浒率咸錞RIP效应、Ti（C，N）粒子的细晶强化及析出强化效应，多种强化机制叠加作用，最终获得高强韧的中锰钢厚板。     

最优化算法与纯元素谱剥离相结合的能量色散X射线荧光谱解谱方法

在进行能量色散X射线荧光光谱(EDXRF)解谱时,如果给定样品的元素构成,采用纯元素谱图剥离的方式会更加合理,但由于每个元素的谱线都不止一条,如果仅仅针对主线对齐做剥离,会导致结果的严重失真,同时剥离次序对解谱结果有较大影响。介绍了一种最优化算法与纯元素谱剥离相结合的EDXRF解谱方法,该方法以多个纯元素谱的强度大小和峰位漂移道数作为变量构建残差方程,并用最优化计算的方法去调整,直至残差达到极小。实验采用强度顺序剥离、能量顺序剥离和最优化算法拟合3种方法分别对谱线重叠较为严重的La-Ce-Pr-Nd混合液样品的L系谱线进行了解析,结果表明最优化计算方法拟合的谱图与原始谱的残差 (1415.0)比另两种方法(166094.0和3192.7)大幅度缩小,拟合谱与原始谱更为吻合,并且方法在实现时对初值不敏感,解谱精度也不依赖于剥离次序。     

Chirality‐Based Biosensors

The fabrication of chiral nanostructures gives rise to characteristic chiroptical activity, which can be used for chirality‐based biosensors. Great progress is made in the use of nanoassemblies for the construction of chiral nanoparticle dimers, pyramids, helices, and twisted structures, and their chiroptical activities correlate with diverse structural geometries and enantiomeric configurations. In DNA‐hybridization‐based chiral nanoassemblies, the assembly parameters, such as the components, gaps, multicomponents, and the aftergrowth of metal, can result in multiple bands and enhanced chiroptical effects. Based on known chiral nanostructures, the existing chiral nanoassembly‐based biosensors together with their targets and signal amplification strategies are reviewed. Chirality involves multiple signals, and multitarget biosensors are introduced with newly developed chiral architectures for the accurate and reliable monitoring of biomarkers in living cells. The interactions between chiral nanoarchitectures and biosystems are also highlighted, which are important not only in the chiral dynamic switching of nano‐objects for biomonitoring, but also in manipulating cell growth, proliferation, and adhesion. The future perspectives on chiral fabrication and its use in biosensors are also comprehensively discussed.     

18F-NaF注射液的制备及新西兰兔骨折显像

由外伤或肿瘤骨转移造成的隐匿性骨折和愈合情况的准确诊断对制定合适的治疗方案具有非常重要的意义。为考查¹⁸F-NaF PET显像用于骨折诊断的诊断效能，本研究制备了¹⁸F-NaF注射液，并对其进行了质量控制和稳定性研究，然后建立新西兰兔骨折动物模型，模型建立约2周后进行了¹⁸F-NaF PET显像和⁹⁹Tc^m-亚甲基二磷酸盐（⁹⁹Tc^m-MDP）SPECT显像的自身对照实验，并对显像效果进行了比较。结果表明：¹⁸F-NaF的产量大于37 GBq，各项检验结果均符合质控要求，40 ℃下放置8 h和30 ℃下放置10 h所有检验结果均无明显变化；¹⁸F-NaF PET和⁹⁹Tc^m-MDP SPECT两种显像方式均可见全身骨骼，骨折部位呈明显放射性浓聚，但¹⁸F-NaF给药后30 min即可进行PET显像，骨折部位显示更为清晰，骨折部位与对侧正常骨骼的放射性摄取比（T/NT）明显高于⁹⁹Tc^m-MDP，而⁹⁹Tc^m-MDP需在给药后2 h才能进行SPECT显像。本研究表明¹⁸F-NaF PET对骨折的显像性能优于⁹⁹Tc^m-MDP，可明显提高检查流通量和诊断效能。     

304不锈钢不同精炼渣碱度下夹杂物的演变

 为了提高304不锈钢的产品质量，结合生产实际，利用热力学计算和扫描电镜能谱分析方法, 研究了硅脱氧条件下，LF精炼渣碱度对304不锈钢在LF精炼、连铸过程夹杂物变化规律的影响。试验结果表明,随着冶炼过程进行，全氧质量分数和夹杂物数量依次减小。304不锈钢采用1.75高碱度炉渣，可以得到较低的全氧质量分数和夹杂物数量，但是夹杂物中Al2O3质量分数高，夹杂物熔点高。采用1.53低碱度炉渣，钢液中全氧质量分数较采用高碱度炉渣高，但是夹杂物中CaO、Al2O3质量分数相对较低，SiO2和MnO质量分数较高，夹杂物熔点低。针对304不锈钢产品可以采用不同的生产工艺路线来满足产品的不同需求。